Good question Harry. This paint contains a low amount of VOC's (solvents that cause odour) this means that it doesn't smell too strong and is less harmful to both us and the environment. We do recommend to open the windows though, just to keep the room ventilated during and after painting.

We certainly do Yolanda. It's always best to start by removing any curtains/ blinds and moving furniture away from the walls, just to avoid any paint splashes. It's a good idea to then cover everything left in the room with large dust sheets to keep it clean. Any fixtures or fittings should be taped over and you should make sure the walls are clean, dry and dust free - I hope this helps.

That's exactly right Lucas! We recommend to leave this paint for a minimum of 48 hours before exposing to any moisture such as shower steam etc.

Thanks for your question Pip. Unfortunately this paint isn't suitable for metalwork such as radiators.

Super question Augusta. This paint has been specially formulated for rooms with high moisture levels, but it can still be used in any room within your home.

Hi Ray, absolutely fine. As usual we’d recommend 'cutting in' around the edges of the room, light switches etc. then paint the main wall surface with your roller, in vertical strokes, overlapping each stroke slightly. Take care not to overload or press too hard on the roller to squeeze the paint out. 2 coats will be best up to and overlapping, the edges you've cut in. You only need to paint the cutting in once and avoid the temptation of painting them again, after you've completed the main wall surface.

Our kitchen & bathroom paint has great moisture-resistance Khalid. However I wouldn't apply it directly to splash zones, such as the area within a shower or behind a basin. In these areas you should tile.