In this video, we show you just how simple installing fitted furniture can be.
Remember to always consult a professional if you aren’t comfortable with intermediate DIY tasks.
All units that make up your fitted furniture package will be installed in the same way. Why not find out more about our bathroom furniture ranges?
To start, unpack your unit and give it a once over.
You could remove any doors at this point to make handling the unit easier.
Measure the distance from the top of your unit to the fixing bracket.
We will be using this large cabinet to work from. Now mark the location for the fixing bracket on the wall.
Check the area for pipes and wires with a detector.
Remember to use the necessary safety equipment when drilling the holes. And to also use the correct drill and bit for the surface type.
If your unit comes with extra fixing screws, remember to drill the holes for these too.
Tap in a wall plug then fix the bracket in place, checking that it’s level.
Now fit the unit to the wall and screw in place with the fixing screws.
Replace the doors and hinges and there you have it. You have successfully fitted your wall hung unit.
Just look out for the Add to compare around the site and revisit this linkClose and continue
You can add as many products as you like, there is no limit. When you’re ready simply visit this page to start comparing your products.Close and continue