If you are replacing your old bath, these are the measurements you will need to take.
Measure from one end to the other, starting at the widest point for curved and corner baths.
Note this measurement as the length.
Now measure from the back wall or edge to the front, this will give you the width.
Then, on the exterior of the bath, measure from your floor to the top edge, giving you the height.
Finally the depth which is the interior measurement from the deepest part of your bath to the overflow. This is to gauge the depth of water it can hold.
Just look out for the Add to compare around the site and revisit this linkClose and continue
You can add as many products as you like, there is no limit. When you’re ready simply visit this page to start comparing your products.Close and continue