Mode Ellis thermostatic triple shower valve complete shower set

A shower pump is only required for those with low pressure. At over 1 bar with a combi boiler this shower will work fine on your system.

As it's on a triple valve Lee, 1 handle can operate the overhead, 1 can operate a riser handset and the other operates the temperature. You can use one or the other or both at the same time.

No problem Matt, as long as you have a minimum of 1 bar pressure on both hot and cold water supplies.

The head comes on a ball joint so can be tilted slightly Kerry and the wall arm is 350mm long from the wall.

Hi Mark, the minimum depth you'd need is 75mm and the maximum 88mm.

The height between the floor and the square shower head is totally down to your personal preference Andrew, there is no minimum height required.

Great question, there are 3 valves so you can control the water temperature, the main head and the hand held head separately.You can also use the main head and hand held unit at the same time.

Hi Chris, these are made from ABS with a chrome coating.

Hi Anton, the connections are a standard size so if you do wish to put a circular head on in future this would be fine.

Hi Jo, you can indeed connect this away from the slider rail, but you would need to source a wall mounted hand spray holder.