Orchard L shaped left handed shower bath

Great to see your interest in this bath Abi. The wider end is indeed 850mm, with the narrow end at 700mm.

As long as the taps are being installed on the wall side Martin, there wouldn't be an issue with you fitting them on the side of the bath.

Yes, a standard 29mm hole cutter is what you need to drill the holes. We suggest you measure carefully based on your bath tap hole requirements and carefully drill a pilot hole before drilling the final larger hole.

Hi Mrs Cogger, this bath is 4mm thick and reinforced with fibreglass to make it stronger. It also has an encapsulated baseboard for added strength.

Hi David, the height on this bath is the height not including the feet, which can approximately add 105mm to the height.

Yes, these holes are drilled to British Standard dimensions so will fit all our bath wastes with overflows.

Hi Ella, the width of the shower end is 850mm the length of the same part is 845 mm approx.

Hi Sarah, if you click the “You will need” tab with this product and hit the arrow right on the screen there are 4 different rails that we recommend with this bath.

Acrylic is the material the bath is moulded from. After moulding, this material is then reinforced with fibre glass to make it stronger. The two materials together are also insulating so your bath will be warmer longer.

It does come with the supporting legs Rita, the panels are purchased separately and will show in the 'You Will Need' section.